diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
index 6fc3902..c63e864 100644
--- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
+++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c
@@ -378,10 +378,10 @@
 }
 #endif /* CONFIG_ARCH_MISC_INIT */
 
-#ifdef CONFIG_KIRKWOOD_EGIGA
+#ifdef CONFIG_MVGBE
 int cpu_eth_init(bd_t *bis)
 {
-	kirkwood_egiga_initialize(bis);
+	mvgbe_initialize(bis);
 	return 0;
 }
 #endif
diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
index 2470efb..5c2586b 100644
--- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h
+++ b/arch/arm/include/asm/arch-kirkwood/kirkwood.h
@@ -60,6 +60,9 @@
 #define KW_EGIGA0_BASE			(KW_REGISTER(0x72000))
 #define KW_EGIGA1_BASE			(KW_REGISTER(0x76000))
 
+#define MVGBE0_BASE			KW_EGIGA0_BASE
+#define MVGBE1_BASE			KW_EGIGA1_BASE
+
 #if defined (CONFIG_KW88F6281)
 #include <asm/arch/kw88f6281.h>
 #elif defined (CONFIG_KW88F6192)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 0894822..218eeff 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -53,7 +53,7 @@
 COBJS-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
 COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
 COBJS-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o
-COBJS-$(CONFIG_KIRKWOOD_EGIGA) += mvgbe.o
+COBJS-$(CONFIG_MVGBE) += mvgbe.o
 COBJS-$(CONFIG_NATSEMI) += natsemi.o
 COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
 COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c
index 1efca1e..e44352c 100644
--- a/drivers/net/mvgbe.c
+++ b/drivers/net/mvgbe.c
@@ -35,13 +35,17 @@
 #include <asm/errno.h>
 #include <asm/types.h>
 #include <asm/byteorder.h>
+
+#if defined(CONFIG_KIRKWOOD)
 #include <asm/arch/kirkwood.h>
+#endif
+
 #include "mvgbe.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define KIRKWOOD_PHY_ADR_REQUEST 0xee
-#define KWGBE_SMI_REG (((struct kwgbe_registers *)KW_EGIGA0_BASE)->smi)
+#define MV_PHY_ADR_REQUEST 0xee
+#define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi)
 
 /*
  * smi_reg_read - miiphy_read callback function.
@@ -51,16 +55,16 @@
 static int smi_reg_read(char *devname, u8 phy_adr, u8 reg_ofs, u16 * data)
 {
 	struct eth_device *dev = eth_get_dev_by_name(devname);
-	struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
-	struct kwgbe_registers *regs = dkwgbe->regs;
+	struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+	struct mvgbe_registers *regs = dmvgbe->regs;
 	u32 smi_reg;
 	u32 timeout;
 
 	/* Phyadr read request */
-	if (phy_adr == KIRKWOOD_PHY_ADR_REQUEST &&
-			reg_ofs == KIRKWOOD_PHY_ADR_REQUEST) {
+	if (phy_adr == MV_PHY_ADR_REQUEST &&
+			reg_ofs == MV_PHY_ADR_REQUEST) {
 		/* */
-		*data = (u16) (KWGBEREG_RD(regs->phyadr) & PHYADR_MASK);
+		*data = (u16) (MVGBE_REG_RD(regs->phyadr) & PHYADR_MASK);
 		return 0;
 	}
 	/* check parameters */
@@ -75,42 +79,43 @@
 		return -EFAULT;
 	}
 
-	timeout = KWGBE_PHY_SMI_TIMEOUT;
+	timeout = MVGBE_PHY_SMI_TIMEOUT;
 	/* wait till the SMI is not busy */
 	do {
 		/* read smi register */
-		smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
+		smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);
 		if (timeout-- == 0) {
 			printf("Err..(%s) SMI busy timeout\n", __FUNCTION__);
 			return -EFAULT;
 		}
-	} while (smi_reg & KWGBE_PHY_SMI_BUSY_MASK);
+	} while (smi_reg & MVGBE_PHY_SMI_BUSY_MASK);
 
 	/* fill the phy address and regiser offset and read opcode */
-	smi_reg = (phy_adr << KWGBE_PHY_SMI_DEV_ADDR_OFFS)
-		| (reg_ofs << KWGBE_SMI_REG_ADDR_OFFS)
-		| KWGBE_PHY_SMI_OPCODE_READ;
+	smi_reg = (phy_adr << MVGBE_PHY_SMI_DEV_ADDR_OFFS)
+		| (reg_ofs << MVGBE_SMI_REG_ADDR_OFFS)
+		| MVGBE_PHY_SMI_OPCODE_READ;
 
 	/* write the smi register */
-	KWGBEREG_WR(KWGBE_SMI_REG, smi_reg);
+	MVGBE_REG_WR(MVGBE_SMI_REG, smi_reg);
 
 	/*wait till read value is ready */
-	timeout = KWGBE_PHY_SMI_TIMEOUT;
+	timeout = MVGBE_PHY_SMI_TIMEOUT;
 
 	do {
 		/* read smi register */
-		smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
+		smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);
 		if (timeout-- == 0) {
 			printf("Err..(%s) SMI read ready timeout\n",
 				__FUNCTION__);
 			return -EFAULT;
 		}
-	} while (!(smi_reg & KWGBE_PHY_SMI_READ_VALID_MASK));
+	} while (!(smi_reg & MVGBE_PHY_SMI_READ_VALID_MASK));
 
 	/* Wait for the data to update in the SMI register */
-	for (timeout = 0; timeout < KWGBE_PHY_SMI_TIMEOUT; timeout++) ;
+	for (timeout = 0; timeout < MVGBE_PHY_SMI_TIMEOUT; timeout++)
+		;
 
-	*data = (u16) (KWGBEREG_RD(KWGBE_SMI_REG) & KWGBE_PHY_SMI_DATA_MASK);
+	*data = (u16) (MVGBE_REG_RD(MVGBE_SMI_REG) & MVGBE_PHY_SMI_DATA_MASK);
 
 	debug("%s:(adr %d, off %d) value= %04x\n", __FUNCTION__, phy_adr,
 		reg_ofs, *data);
@@ -127,15 +132,15 @@
 static int smi_reg_write(char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
 {
 	struct eth_device *dev = eth_get_dev_by_name(devname);
-	struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
-	struct kwgbe_registers *regs = dkwgbe->regs;
+	struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+	struct mvgbe_registers *regs = dmvgbe->regs;
 	u32 smi_reg;
 	u32 timeout;
 
 	/* Phyadr write request*/
-	if (phy_adr == KIRKWOOD_PHY_ADR_REQUEST &&
-			reg_ofs == KIRKWOOD_PHY_ADR_REQUEST) {
-		KWGBEREG_WR(regs->phyadr, data);
+	if (phy_adr == MV_PHY_ADR_REQUEST &&
+			reg_ofs == MV_PHY_ADR_REQUEST) {
+		MVGBE_REG_WR(regs->phyadr, data);
 		return 0;
 	}
 
@@ -150,24 +155,24 @@
 	}
 
 	/* wait till the SMI is not busy */
-	timeout = KWGBE_PHY_SMI_TIMEOUT;
+	timeout = MVGBE_PHY_SMI_TIMEOUT;
 	do {
 		/* read smi register */
-		smi_reg = KWGBEREG_RD(KWGBE_SMI_REG);
+		smi_reg = MVGBE_REG_RD(MVGBE_SMI_REG);
 		if (timeout-- == 0) {
 			printf("Err..(%s) SMI busy timeout\n", __FUNCTION__);
 			return -ETIME;
 		}
-	} while (smi_reg & KWGBE_PHY_SMI_BUSY_MASK);
+	} while (smi_reg & MVGBE_PHY_SMI_BUSY_MASK);
 
 	/* fill the phy addr and reg offset and write opcode and data */
-	smi_reg = (data << KWGBE_PHY_SMI_DATA_OFFS);
-	smi_reg |= (phy_adr << KWGBE_PHY_SMI_DEV_ADDR_OFFS)
-		| (reg_ofs << KWGBE_SMI_REG_ADDR_OFFS);
-	smi_reg &= ~KWGBE_PHY_SMI_OPCODE_READ;
+	smi_reg = (data << MVGBE_PHY_SMI_DATA_OFFS);
+	smi_reg |= (phy_adr << MVGBE_PHY_SMI_DEV_ADDR_OFFS)
+		| (reg_ofs << MVGBE_SMI_REG_ADDR_OFFS);
+	smi_reg &= ~MVGBE_PHY_SMI_OPCODE_READ;
 
 	/* write the smi register */
-	KWGBEREG_WR(KWGBE_SMI_REG, smi_reg);
+	MVGBE_REG_WR(MVGBE_SMI_REG, smi_reg);
 
 	return 0;
 }
@@ -204,46 +209,46 @@
  * @regs	Register struct pointer.
  * @param	Address decode parameter struct.
  */
-static void set_access_control(struct kwgbe_registers *regs,
-				struct kwgbe_winparam *param)
+static void set_access_control(struct mvgbe_registers *regs,
+				struct mvgbe_winparam *param)
 {
 	u32 access_prot_reg;
 
 	/* Set access control register */
-	access_prot_reg = KWGBEREG_RD(regs->epap);
+	access_prot_reg = MVGBE_REG_RD(regs->epap);
 	/* clear window permission */
 	access_prot_reg &= (~(3 << (param->win * 2)));
 	access_prot_reg |= (param->access_ctrl << (param->win * 2));
-	KWGBEREG_WR(regs->epap, access_prot_reg);
+	MVGBE_REG_WR(regs->epap, access_prot_reg);
 
 	/* Set window Size reg (SR) */
-	KWGBEREG_WR(regs->barsz[param->win].size,
+	MVGBE_REG_WR(regs->barsz[param->win].size,
 			(((param->size / 0x10000) - 1) << 16));
 
 	/* Set window Base address reg (BA) */
-	KWGBEREG_WR(regs->barsz[param->win].bar,
+	MVGBE_REG_WR(regs->barsz[param->win].bar,
 			(param->target | param->attrib | param->base_addr));
 	/* High address remap reg (HARR) */
 	if (param->win < 4)
-		KWGBEREG_WR(regs->ha_remap[param->win], param->high_addr);
+		MVGBE_REG_WR(regs->ha_remap[param->win], param->high_addr);
 
 	/* Base address enable reg (BARER) */
 	if (param->enable == 1)
-		KWGBEREG_BITS_RESET(regs->bare, (1 << param->win));
+		MVGBE_REG_BITS_RESET(regs->bare, (1 << param->win));
 	else
-		KWGBEREG_BITS_SET(regs->bare, (1 << param->win));
+		MVGBE_REG_BITS_SET(regs->bare, (1 << param->win));
 }
 
-static void set_dram_access(struct kwgbe_registers *regs)
+static void set_dram_access(struct mvgbe_registers *regs)
 {
-	struct kwgbe_winparam win_param;
+	struct mvgbe_winparam win_param;
 	int i;
 
 	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
 		/* Set access parameters for DRAM bank i */
 		win_param.win = i;	/* Use Ethernet window i */
 		/* Window target - DDR */
-		win_param.target = KWGBE_TARGET_DRAM;
+		win_param.target = MVGBE_TARGET_DRAM;
 		/* Enable full access */
 		win_param.access_ctrl = EWIN_ACCESS_FULL;
 		win_param.high_addr = 0;
@@ -286,19 +291,19 @@
  * Go through all the DA filter tables (Unicast, Special Multicast & Other
  * Multicast) and set each entry to 0.
  */
-static void port_init_mac_tables(struct kwgbe_registers *regs)
+static void port_init_mac_tables(struct mvgbe_registers *regs)
 {
 	int table_index;
 
 	/* Clear DA filter unicast table (Ex_dFUT) */
 	for (table_index = 0; table_index < 4; ++table_index)
-		KWGBEREG_WR(regs->dfut[table_index], 0);
+		MVGBE_REG_WR(regs->dfut[table_index], 0);
 
 	for (table_index = 0; table_index < 64; ++table_index) {
 		/* Clear DA filter special multicast table (Ex_dFSMT) */
-		KWGBEREG_WR(regs->dfsmt[table_index], 0);
+		MVGBE_REG_WR(regs->dfsmt[table_index], 0);
 		/* Clear DA filter other multicast table (Ex_dFOMT) */
-		KWGBEREG_WR(regs->dfomt[table_index], 0);
+		MVGBE_REG_WR(regs->dfomt[table_index], 0);
 	}
 }
 
@@ -316,7 +321,7 @@
  *
  * RETURN: 1 if output succeeded. 0 if option parameter is invalid.
  */
-static int port_uc_addr(struct kwgbe_registers *regs, u8 uc_nibble,
+static int port_uc_addr(struct mvgbe_registers *regs, u8 uc_nibble,
 			int option)
 {
 	u32 unicast_reg;
@@ -336,16 +341,16 @@
 		 * Clear accepts frame bit at specified unicast
 		 * DA table entry
 		 */
-		unicast_reg = KWGBEREG_RD(regs->dfut[tbl_offset]);
+		unicast_reg = MVGBE_REG_RD(regs->dfut[tbl_offset]);
 		unicast_reg &= (0xFF << (8 * reg_offset));
-		KWGBEREG_WR(regs->dfut[tbl_offset], unicast_reg);
+		MVGBE_REG_WR(regs->dfut[tbl_offset], unicast_reg);
 		break;
 	case ACCEPT_MAC_ADDR:
 		/* Set accepts frame bit at unicast DA filter table entry */
-		unicast_reg = KWGBEREG_RD(regs->dfut[tbl_offset]);
+		unicast_reg = MVGBE_REG_RD(regs->dfut[tbl_offset]);
 		unicast_reg &= (0xFF << (8 * reg_offset));
 		unicast_reg |= ((0x01 | (RXUQ << 1)) << (8 * reg_offset));
-		KWGBEREG_WR(regs->dfut[tbl_offset], unicast_reg);
+		MVGBE_REG_WR(regs->dfut[tbl_offset], unicast_reg);
 		break;
 	default:
 		return 0;
@@ -356,7 +361,7 @@
 /*
  * port_uc_addr_set - This function Set the port Unicast address.
  */
-static void port_uc_addr_set(struct kwgbe_registers *regs, u8 * p_addr)
+static void port_uc_addr_set(struct mvgbe_registers *regs, u8 * p_addr)
 {
 	u32 mac_h;
 	u32 mac_l;
@@ -365,94 +370,95 @@
 	mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | (p_addr[2] << 8) |
 		(p_addr[3] << 0);
 
-	KWGBEREG_WR(regs->macal, mac_l);
-	KWGBEREG_WR(regs->macah, mac_h);
+	MVGBE_REG_WR(regs->macal, mac_l);
+	MVGBE_REG_WR(regs->macah, mac_h);
 
 	/* Accept frames of this address */
 	port_uc_addr(regs, p_addr[5], ACCEPT_MAC_ADDR);
 }
 
 /*
- * kwgbe_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
+ * mvgbe_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
  */
-static void kwgbe_init_rx_desc_ring(struct kwgbe_device *dkwgbe)
+static void mvgbe_init_rx_desc_ring(struct mvgbe_device *dmvgbe)
 {
-	struct kwgbe_rxdesc *p_rx_desc;
+	struct mvgbe_rxdesc *p_rx_desc;
 	int i;
 
 	/* initialize the Rx descriptors ring */
-	p_rx_desc = dkwgbe->p_rxdesc;
+	p_rx_desc = dmvgbe->p_rxdesc;
 	for (i = 0; i < RINGSZ; i++) {
 		p_rx_desc->cmd_sts =
-			KWGBE_BUFFER_OWNED_BY_DMA | KWGBE_RX_EN_INTERRUPT;
+			MVGBE_BUFFER_OWNED_BY_DMA | MVGBE_RX_EN_INTERRUPT;
 		p_rx_desc->buf_size = PKTSIZE_ALIGN;
 		p_rx_desc->byte_cnt = 0;
-		p_rx_desc->buf_ptr = dkwgbe->p_rxbuf + i * PKTSIZE_ALIGN;
+		p_rx_desc->buf_ptr = dmvgbe->p_rxbuf + i * PKTSIZE_ALIGN;
 		if (i == (RINGSZ - 1))
-			p_rx_desc->nxtdesc_p = dkwgbe->p_rxdesc;
+			p_rx_desc->nxtdesc_p = dmvgbe->p_rxdesc;
 		else {
-			p_rx_desc->nxtdesc_p = (struct kwgbe_rxdesc *)
-				((u32) p_rx_desc + KW_RXQ_DESC_ALIGNED_SIZE);
+			p_rx_desc->nxtdesc_p = (struct mvgbe_rxdesc *)
+				((u32) p_rx_desc + MV_RXQ_DESC_ALIGNED_SIZE);
 			p_rx_desc = p_rx_desc->nxtdesc_p;
 		}
 	}
-	dkwgbe->p_rxdesc_curr = dkwgbe->p_rxdesc;
+	dmvgbe->p_rxdesc_curr = dmvgbe->p_rxdesc;
 }
 
-static int kwgbe_init(struct eth_device *dev)
+static int mvgbe_init(struct eth_device *dev)
 {
-	struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
-	struct kwgbe_registers *regs = dkwgbe->regs;
+	struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+	struct mvgbe_registers *regs = dmvgbe->regs;
 #if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \
 	 && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
 	int i;
 #endif
 	/* setup RX rings */
-	kwgbe_init_rx_desc_ring(dkwgbe);
+	mvgbe_init_rx_desc_ring(dmvgbe);
 
 	/* Clear the ethernet port interrupts */
-	KWGBEREG_WR(regs->ic, 0);
-	KWGBEREG_WR(regs->ice, 0);
+	MVGBE_REG_WR(regs->ic, 0);
+	MVGBE_REG_WR(regs->ice, 0);
 	/* Unmask RX buffer and TX end interrupt */
-	KWGBEREG_WR(regs->pim, INT_CAUSE_UNMASK_ALL);
+	MVGBE_REG_WR(regs->pim, INT_CAUSE_UNMASK_ALL);
 	/* Unmask phy and link status changes interrupts */
-	KWGBEREG_WR(regs->peim, INT_CAUSE_UNMASK_ALL_EXT);
+	MVGBE_REG_WR(regs->peim, INT_CAUSE_UNMASK_ALL_EXT);
 
 	set_dram_access(regs);
 	port_init_mac_tables(regs);
-	port_uc_addr_set(regs, dkwgbe->dev.enetaddr);
+	port_uc_addr_set(regs, dmvgbe->dev.enetaddr);
 
 	/* Assign port configuration and command. */
-	KWGBEREG_WR(regs->pxc, PRT_CFG_VAL);
-	KWGBEREG_WR(regs->pxcx, PORT_CFG_EXTEND_VALUE);
-	KWGBEREG_WR(regs->psc0, PORT_SERIAL_CONTROL_VALUE);
+	MVGBE_REG_WR(regs->pxc, PRT_CFG_VAL);
+	MVGBE_REG_WR(regs->pxcx, PORT_CFG_EXTEND_VALUE);
+	MVGBE_REG_WR(regs->psc0, PORT_SERIAL_CONTROL_VALUE);
 
 	/* Assign port SDMA configuration */
-	KWGBEREG_WR(regs->sdc, PORT_SDMA_CFG_VALUE);
-	KWGBEREG_WR(regs->tqx[0].qxttbc, QTKNBKT_DEF_VAL);
-	KWGBEREG_WR(regs->tqx[0].tqxtbc, (QMTBS_DEF_VAL << 16) | QTKNRT_DEF_VAL);
+	MVGBE_REG_WR(regs->sdc, PORT_SDMA_CFG_VALUE);
+	MVGBE_REG_WR(regs->tqx[0].qxttbc, QTKNBKT_DEF_VAL);
+	MVGBE_REG_WR(regs->tqx[0].tqxtbc,
+		(QMTBS_DEF_VAL << 16) | QTKNRT_DEF_VAL);
 	/* Turn off the port/RXUQ bandwidth limitation */
-	KWGBEREG_WR(regs->pmtu, 0);
+	MVGBE_REG_WR(regs->pmtu, 0);
 
 	/* Set maximum receive buffer to 9700 bytes */
-	KWGBEREG_WR(regs->psc0,	KWGBE_MAX_RX_PACKET_9700BYTE
-			| (KWGBEREG_RD(regs->psc0) & MRU_MASK));
+	MVGBE_REG_WR(regs->psc0, MVGBE_MAX_RX_PACKET_9700BYTE
+			| (MVGBE_REG_RD(regs->psc0) & MRU_MASK));
 
 	/* Enable port initially */
-	KWGBEREG_BITS_SET(regs->psc0, KWGBE_SERIAL_PORT_EN);
+	MVGBE_REG_BITS_SET(regs->psc0, MVGBE_SERIAL_PORT_EN);
 
 	/*
 	 * Set ethernet MTU for leaky bucket mechanism to 0 - this will
 	 * disable the leaky bucket mechanism .
 	 */
-	KWGBEREG_WR(regs->pmtu, 0);
+	MVGBE_REG_WR(regs->pmtu, 0);
 
 	/* Assignment of Rx CRDB of given RXUQ */
-	KWGBEREG_WR(regs->rxcdp[RXUQ], (u32) dkwgbe->p_rxdesc_curr);
+	MVGBE_REG_WR(regs->rxcdp[RXUQ], (u32) dmvgbe->p_rxdesc_curr);
 	/* ensure previous write is done before enabling Rx DMA */
 	isb();
 	/* Enable port Rx. */
-	KWGBEREG_WR(regs->rqc, (1 << RXUQ));
+	MVGBE_REG_WR(regs->rqc, (1 << RXUQ));
 
 #if (defined (CONFIG_MII) || defined (CONFIG_CMD_MII)) \
 	 && defined (CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
@@ -460,8 +466,8 @@
 	for (i = 0; i < 5; i++) {
 		u16 phyadr;
 
-		miiphy_read(dev->name, KIRKWOOD_PHY_ADR_REQUEST,
-				KIRKWOOD_PHY_ADR_REQUEST, &phyadr);
+		miiphy_read(dev->name, MV_PHY_ADR_REQUEST,
+				MV_PHY_ADR_REQUEST, &phyadr);
 		/* Return if we get link up */
 		if (miiphy_link(dev->name, phyadr))
 			return 0;
@@ -474,50 +480,50 @@
 	return 0;
 }
 
-static int kwgbe_halt(struct eth_device *dev)
+static int mvgbe_halt(struct eth_device *dev)
 {
-	struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
-	struct kwgbe_registers *regs = dkwgbe->regs;
+	struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+	struct mvgbe_registers *regs = dmvgbe->regs;
 
 	/* Disable all gigE address decoder */
-	KWGBEREG_WR(regs->bare, 0x3f);
+	MVGBE_REG_WR(regs->bare, 0x3f);
 
 	stop_queue(&regs->tqc);
 	stop_queue(&regs->rqc);
 
 	/* Disable port */
-	KWGBEREG_BITS_RESET(regs->psc0, KWGBE_SERIAL_PORT_EN);
+	MVGBE_REG_BITS_RESET(regs->psc0, MVGBE_SERIAL_PORT_EN);
 	/* Set port is not reset */
-	KWGBEREG_BITS_RESET(regs->psc1, 1 << 4);
+	MVGBE_REG_BITS_RESET(regs->psc1, 1 << 4);
 #ifdef CONFIG_SYS_MII_MODE
 	/* Set MMI interface up */
-	KWGBEREG_BITS_RESET(regs->psc1, 1 << 3);
+	MVGBE_REG_BITS_RESET(regs->psc1, 1 << 3);
 #endif
 	/* Disable & mask ethernet port interrupts */
-	KWGBEREG_WR(regs->ic, 0);
-	KWGBEREG_WR(regs->ice, 0);
-	KWGBEREG_WR(regs->pim, 0);
-	KWGBEREG_WR(regs->peim, 0);
+	MVGBE_REG_WR(regs->ic, 0);
+	MVGBE_REG_WR(regs->ice, 0);
+	MVGBE_REG_WR(regs->pim, 0);
+	MVGBE_REG_WR(regs->peim, 0);
 
 	return 0;
 }
 
-static int kwgbe_write_hwaddr(struct eth_device *dev)
+static int mvgbe_write_hwaddr(struct eth_device *dev)
 {
-	struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
-	struct kwgbe_registers *regs = dkwgbe->regs;
+	struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+	struct mvgbe_registers *regs = dmvgbe->regs;
 
 	/* Programs net device MAC address after initialization */
-	port_uc_addr_set(regs, dkwgbe->dev.enetaddr);
+	port_uc_addr_set(regs, dmvgbe->dev.enetaddr);
 	return 0;
 }
 
-static int kwgbe_send(struct eth_device *dev, volatile void *dataptr,
+static int mvgbe_send(struct eth_device *dev, void *dataptr,
 		      int datasize)
 {
-	struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
-	struct kwgbe_registers *regs = dkwgbe->regs;
-	struct kwgbe_txdesc *p_txdesc = dkwgbe->p_txdesc;
+	struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+	struct mvgbe_registers *regs = dmvgbe->regs;
+	struct mvgbe_txdesc *p_txdesc = dmvgbe->p_txdesc;
 	void *p = (void *)dataptr;
 	u32 cmd_sts;
 
@@ -529,35 +535,35 @@
 			return -1;
 		}
 
-		memcpy(dkwgbe->p_aligned_txbuf, p, datasize);
-		p = dkwgbe->p_aligned_txbuf;
+		memcpy(dmvgbe->p_aligned_txbuf, p, datasize);
+		p = dmvgbe->p_aligned_txbuf;
 	}
 
-	p_txdesc->cmd_sts = KWGBE_ZERO_PADDING | KWGBE_GEN_CRC;
-	p_txdesc->cmd_sts |= KWGBE_TX_FIRST_DESC | KWGBE_TX_LAST_DESC;
-	p_txdesc->cmd_sts |= KWGBE_BUFFER_OWNED_BY_DMA;
-	p_txdesc->cmd_sts |= KWGBE_TX_EN_INTERRUPT;
+	p_txdesc->cmd_sts = MVGBE_ZERO_PADDING | MVGBE_GEN_CRC;
+	p_txdesc->cmd_sts |= MVGBE_TX_FIRST_DESC | MVGBE_TX_LAST_DESC;
+	p_txdesc->cmd_sts |= MVGBE_BUFFER_OWNED_BY_DMA;
+	p_txdesc->cmd_sts |= MVGBE_TX_EN_INTERRUPT;
 	p_txdesc->buf_ptr = (u8 *) p;
 	p_txdesc->byte_cnt = datasize;
 
 	/* Set this tc desc as zeroth TXUQ */
-	KWGBEREG_WR(regs->tcqdp[TXUQ], (u32) p_txdesc);
+	MVGBE_REG_WR(regs->tcqdp[TXUQ], (u32) p_txdesc);
 
 	/* ensure tx desc writes above are performed before we start Tx DMA */
 	isb();
 
 	/* Apply send command using zeroth TXUQ */
-	KWGBEREG_WR(regs->tqc, (1 << TXUQ));
+	MVGBE_REG_WR(regs->tqc, (1 << TXUQ));
 
 	/*
 	 * wait for packet xmit completion
 	 */
 	cmd_sts = readl(&p_txdesc->cmd_sts);
-	while (cmd_sts & KWGBE_BUFFER_OWNED_BY_DMA) {
+	while (cmd_sts & MVGBE_BUFFER_OWNED_BY_DMA) {
 		/* return fail if error is detected */
-		if ((cmd_sts & (KWGBE_ERROR_SUMMARY | KWGBE_TX_LAST_FRAME)) ==
-				(KWGBE_ERROR_SUMMARY | KWGBE_TX_LAST_FRAME) &&
-				cmd_sts & (KWGBE_UR_ERROR | KWGBE_RL_ERROR)) {
+		if ((cmd_sts & (MVGBE_ERROR_SUMMARY | MVGBE_TX_LAST_FRAME)) ==
+				(MVGBE_ERROR_SUMMARY | MVGBE_TX_LAST_FRAME) &&
+				cmd_sts & (MVGBE_UR_ERROR | MVGBE_RL_ERROR)) {
 			printf("Err..(%s) in xmit packet\n", __FUNCTION__);
 			return -1;
 		}
@@ -566,22 +572,22 @@
 	return 0;
 }
 
-static int kwgbe_recv(struct eth_device *dev)
+static int mvgbe_recv(struct eth_device *dev)
 {
-	struct kwgbe_device *dkwgbe = to_dkwgbe(dev);
-	struct kwgbe_rxdesc *p_rxdesc_curr = dkwgbe->p_rxdesc_curr;
+	struct mvgbe_device *dmvgbe = to_mvgbe(dev);
+	struct mvgbe_rxdesc *p_rxdesc_curr = dmvgbe->p_rxdesc_curr;
 	u32 cmd_sts;
 	u32 timeout = 0;
 
 	/* wait untill rx packet available or timeout */
 	do {
-		if (timeout < KWGBE_PHY_SMI_TIMEOUT)
+		if (timeout < MVGBE_PHY_SMI_TIMEOUT)
 			timeout++;
 		else {
 			debug("%s time out...\n", __FUNCTION__);
 			return -1;
 		}
-	} while (readl(&p_rxdesc_curr->cmd_sts) & KWGBE_BUFFER_OWNED_BY_DMA);
+	} while (readl(&p_rxdesc_curr->cmd_sts) & MVGBE_BUFFER_OWNED_BY_DMA);
 
 	if (p_rxdesc_curr->byte_cnt != 0) {
 		debug("%s: Received %d byte Packet @ 0x%x (cmd_sts= %08x)\n",
@@ -598,13 +604,13 @@
 	cmd_sts = readl(&p_rxdesc_curr->cmd_sts);
 
 	if ((cmd_sts &
-		(KWGBE_RX_FIRST_DESC | KWGBE_RX_LAST_DESC))
-		!= (KWGBE_RX_FIRST_DESC | KWGBE_RX_LAST_DESC)) {
+		(MVGBE_RX_FIRST_DESC | MVGBE_RX_LAST_DESC))
+		!= (MVGBE_RX_FIRST_DESC | MVGBE_RX_LAST_DESC)) {
 
 		printf("Err..(%s) Dropping packet spread on"
 			" multiple descriptors\n", __FUNCTION__);
 
-	} else if (cmd_sts & KWGBE_ERROR_SUMMARY) {
+	} else if (cmd_sts & MVGBE_ERROR_SUMMARY) {
 
 		printf("Err..(%s) Dropping packet with errors\n",
 			__FUNCTION__);
@@ -622,62 +628,72 @@
 	 * free these descriptors and point next in the ring
 	 */
 	p_rxdesc_curr->cmd_sts =
-		KWGBE_BUFFER_OWNED_BY_DMA | KWGBE_RX_EN_INTERRUPT;
+		MVGBE_BUFFER_OWNED_BY_DMA | MVGBE_RX_EN_INTERRUPT;
 	p_rxdesc_curr->buf_size = PKTSIZE_ALIGN;
 	p_rxdesc_curr->byte_cnt = 0;
 
-	writel((unsigned)p_rxdesc_curr->nxtdesc_p, (u32) &dkwgbe->p_rxdesc_curr);
+	writel((unsigned)p_rxdesc_curr->nxtdesc_p,
+		(u32) &dmvgbe->p_rxdesc_curr);
 
 	return 0;
 }
 
-int kirkwood_egiga_initialize(bd_t * bis)
+int mvgbe_initialize(bd_t *bis)
 {
-	struct kwgbe_device *dkwgbe;
+	struct mvgbe_device *dmvgbe;
 	struct eth_device *dev;
 	int devnum;
 	char *s;
-	u8 used_ports[MAX_KWGBE_DEVS] = CONFIG_KIRKWOOD_EGIGA_PORTS;
+	u8 used_ports[MAX_MVGBE_DEVS] = CONFIG_MVGBE_PORTS;
 
-	for (devnum = 0; devnum < MAX_KWGBE_DEVS; devnum++) {
+	for (devnum = 0; devnum < MAX_MVGBE_DEVS; devnum++) {
 		/*skip if port is configured not to use */
 		if (used_ports[devnum] == 0)
 			continue;
 
-		if (!(dkwgbe = malloc(sizeof(struct kwgbe_device))))
+		dmvgbe = malloc(sizeof(struct mvgbe_device));
+
+		if (!dmvgbe)
 			goto error1;
 
-		memset(dkwgbe, 0, sizeof(struct kwgbe_device));
+		memset(dmvgbe, 0, sizeof(struct mvgbe_device));
 
-		if (!(dkwgbe->p_rxdesc =
-		      (struct kwgbe_rxdesc *)memalign(PKTALIGN,
-						KW_RXQ_DESC_ALIGNED_SIZE
-						* RINGSZ + 1)))
+		dmvgbe->p_rxdesc =
+			(struct mvgbe_rxdesc *)memalign(PKTALIGN,
+			MV_RXQ_DESC_ALIGNED_SIZE*RINGSZ + 1);
+
+		if (!dmvgbe->p_rxdesc)
 			goto error2;
 
-		if (!(dkwgbe->p_rxbuf = (u8 *) memalign(PKTALIGN, RINGSZ
-							* PKTSIZE_ALIGN + 1)))
+		dmvgbe->p_rxbuf = (u8 *) memalign(PKTALIGN,
+			RINGSZ*PKTSIZE_ALIGN + 1);
+
+		if (!dmvgbe->p_rxbuf)
 			goto error3;
 
-		if (!(dkwgbe->p_aligned_txbuf = memalign(8, PKTSIZE_ALIGN)))
+		dmvgbe->p_aligned_txbuf = memalign(8, PKTSIZE_ALIGN);
+
+		if (!dmvgbe->p_aligned_txbuf)
 			goto error4;
 
-		if (!(dkwgbe->p_txdesc = (struct kwgbe_txdesc *)
-		      memalign(PKTALIGN, sizeof(struct kwgbe_txdesc) + 1))) {
-			free(dkwgbe->p_aligned_txbuf);
-		      error4:
-			free(dkwgbe->p_rxbuf);
-		      error3:
-			free(dkwgbe->p_rxdesc);
-		      error2:
-			free(dkwgbe);
-		      error1:
+		dmvgbe->p_txdesc = (struct mvgbe_txdesc *) memalign(
+			PKTALIGN, sizeof(struct mvgbe_txdesc) + 1);
+
+		if (!dmvgbe->p_txdesc) {
+			free(dmvgbe->p_aligned_txbuf);
+error4:
+			free(dmvgbe->p_rxbuf);
+error3:
+			free(dmvgbe->p_rxdesc);
+error2:
+			free(dmvgbe);
+error1:
 			printf("Err.. %s Failed to allocate memory\n",
 				__FUNCTION__);
 			return -1;
 		}
 
-		dev = &dkwgbe->dev;
+		dev = &dmvgbe->dev;
 
 		/* must be less than NAMESIZE (16) */
 		sprintf(dev->name, "egiga%d", devnum);
@@ -685,13 +701,15 @@
 		/* Extract the MAC address from the environment */
 		switch (devnum) {
 		case 0:
-			dkwgbe->regs = (void *)KW_EGIGA0_BASE;
+			dmvgbe->regs = (void *)MVGBE0_BASE;
 			s = "ethaddr";
 			break;
+#if defined(MVGBE1_BASE)
 		case 1:
-			dkwgbe->regs = (void *)KW_EGIGA1_BASE;
+			dmvgbe->regs = (void *)MVGBE1_BASE;
 			s = "eth1addr";
 			break;
+#endif
 		default:	/* this should never happen */
 			printf("Err..(%s) Invalid device number %d\n",
 				__FUNCTION__, devnum);
@@ -717,19 +735,19 @@
 			eth_setenv_enetaddr(s, dev->enetaddr);
 		}
 
-		dev->init = (void *)kwgbe_init;
-		dev->halt = (void *)kwgbe_halt;
-		dev->send = (void *)kwgbe_send;
-		dev->recv = (void *)kwgbe_recv;
-		dev->write_hwaddr = (void *)kwgbe_write_hwaddr;
+		dev->init = (void *)mvgbe_init;
+		dev->halt = (void *)mvgbe_halt;
+		dev->send = (void *)mvgbe_send;
+		dev->recv = (void *)mvgbe_recv;
+		dev->write_hwaddr = (void *)mvgbe_write_hwaddr;
 
 		eth_register(dev);
 
 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 		miiphy_register(dev->name, smi_reg_read, smi_reg_write);
 		/* Set phy address of the port */
-		miiphy_write(dev->name, KIRKWOOD_PHY_ADR_REQUEST,
-				KIRKWOOD_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum);
+		miiphy_write(dev->name, MV_PHY_ADR_REQUEST,
+				MV_PHY_ADR_REQUEST, PHY_BASE_ADR + devnum);
 #endif
 	}
 	return 0;
diff --git a/drivers/net/mvgbe.h b/drivers/net/mvgbe.h
index 30c773c..7db5af4 100644
--- a/drivers/net/mvgbe.h
+++ b/drivers/net/mvgbe.h
@@ -25,10 +25,10 @@
  * MA 02110-1301 USA
  */
 
-#ifndef __EGIGA_H__
-#define __EGIGA_H__
+#ifndef __MVGBE_H__
+#define __MVGBE_H__
 
-#define MAX_KWGBE_DEVS	2	/*controller has two ports */
+#define MAX_MVGBE_DEVS	2	/*controller has two ports */
 
 /* PHY_BASE_ADR is board specific and can be configured */
 #if defined (CONFIG_PHY_BASE_ADR)
@@ -49,60 +49,60 @@
 #define RXUQ	0 /* Used Rx queue */
 #define TXUQ	0 /* Used Rx queue */
 
-#define to_dkwgbe(_kd) container_of(_kd, struct kwgbe_device, dev)
-#define KWGBEREG_WR(adr, val)		writel(val, &adr)
-#define KWGBEREG_RD(adr)		readl(&adr)
-#define KWGBEREG_BITS_RESET(adr, val)	writel(readl(&adr) & ~(val), &adr)
-#define KWGBEREG_BITS_SET(adr, val)	writel(readl(&adr) | val, &adr)
+#define to_mvgbe(_d) container_of(_d, struct mvgbe_device, dev)
+#define MVGBE_REG_WR(adr, val)		writel(val, &adr)
+#define MVGBE_REG_RD(adr)		readl(&adr)
+#define MVGBE_REG_BITS_RESET(adr, val)	writel(readl(&adr) & ~(val), &adr)
+#define MVGBE_REG_BITS_SET(adr, val)	writel(readl(&adr) | val, &adr)
 
 /* Default port configuration value */
 #define PRT_CFG_VAL			( \
-	KWGBE_UCAST_MOD_NRML		| \
-	KWGBE_DFLT_RXQ(RXUQ)		| \
-	KWGBE_DFLT_RX_ARPQ(RXUQ)	| \
-	KWGBE_RX_BC_IF_NOT_IP_OR_ARP	| \
-	KWGBE_RX_BC_IF_IP		| \
-	KWGBE_RX_BC_IF_ARP		| \
-	KWGBE_CPTR_TCP_FRMS_DIS		| \
-	KWGBE_CPTR_UDP_FRMS_DIS		| \
-	KWGBE_DFLT_RX_TCPQ(RXUQ)	| \
-	KWGBE_DFLT_RX_UDPQ(RXUQ)	| \
-	KWGBE_DFLT_RX_BPDUQ(RXUQ))
+	MVGBE_UCAST_MOD_NRML		| \
+	MVGBE_DFLT_RXQ(RXUQ)		| \
+	MVGBE_DFLT_RX_ARPQ(RXUQ)	| \
+	MVGBE_RX_BC_IF_NOT_IP_OR_ARP	| \
+	MVGBE_RX_BC_IF_IP		| \
+	MVGBE_RX_BC_IF_ARP		| \
+	MVGBE_CPTR_TCP_FRMS_DIS		| \
+	MVGBE_CPTR_UDP_FRMS_DIS		| \
+	MVGBE_DFLT_RX_TCPQ(RXUQ)	| \
+	MVGBE_DFLT_RX_UDPQ(RXUQ)	| \
+	MVGBE_DFLT_RX_BPDUQ(RXUQ))
 
 /* Default port extend configuration value */
 #define PORT_CFG_EXTEND_VALUE		\
-	KWGBE_SPAN_BPDU_PACKETS_AS_NORMAL	| \
-	KWGBE_PARTITION_DIS		| \
-	KWGBE_TX_CRC_GENERATION_EN
+	MVGBE_SPAN_BPDU_PACKETS_AS_NORMAL	| \
+	MVGBE_PARTITION_DIS		| \
+	MVGBE_TX_CRC_GENERATION_EN
 
-#define GT_KWGBE_IPG_INT_RX(value)	((value & 0x3fff) << 8)
+#define GT_MVGBE_IPG_INT_RX(value)	((value & 0x3fff) << 8)
 
 /* Default sdma control value */
 #define PORT_SDMA_CFG_VALUE		( \
-	KWGBE_RX_BURST_SIZE_16_64BIT	| \
-	KWGBE_BLM_RX_NO_SWAP		| \
-	KWGBE_BLM_TX_NO_SWAP		| \
-	GT_KWGBE_IPG_INT_RX(RXUQ)	| \
-	KWGBE_TX_BURST_SIZE_16_64BIT)
+	MVGBE_RX_BURST_SIZE_16_64BIT	| \
+	MVGBE_BLM_RX_NO_SWAP		| \
+	MVGBE_BLM_TX_NO_SWAP		| \
+	GT_MVGBE_IPG_INT_RX(RXUQ)	| \
+	MVGBE_TX_BURST_SIZE_16_64BIT)
 
 /* Default port serial control value */
 #define PORT_SERIAL_CONTROL_VALUE		( \
-	KWGBE_FORCE_LINK_PASS			| \
-	KWGBE_DIS_AUTO_NEG_FOR_DUPLX		| \
-	KWGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL	| \
-	KWGBE_ADV_NO_FLOW_CTRL			| \
-	KWGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX	| \
-	KWGBE_FORCE_BP_MODE_NO_JAM		| \
+	MVGBE_FORCE_LINK_PASS			| \
+	MVGBE_DIS_AUTO_NEG_FOR_DUPLX		| \
+	MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL	| \
+	MVGBE_ADV_NO_FLOW_CTRL			| \
+	MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX	| \
+	MVGBE_FORCE_BP_MODE_NO_JAM		| \
 	(1 << 9) /* Reserved bit has to be 1 */	| \
-	KWGBE_DO_NOT_FORCE_LINK_FAIL		| \
-	KWGBE_EN_AUTO_NEG_SPEED_GMII		| \
-	KWGBE_DTE_ADV_0				| \
-	KWGBE_MIIPHY_MAC_MODE			| \
-	KWGBE_AUTO_NEG_NO_CHANGE		| \
-	KWGBE_MAX_RX_PACKET_1552BYTE		| \
-	KWGBE_CLR_EXT_LOOPBACK			| \
-	KWGBE_SET_FULL_DUPLEX_MODE		| \
-	KWGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX)
+	MVGBE_DO_NOT_FORCE_LINK_FAIL		| \
+	MVGBE_EN_AUTO_NEG_SPEED_GMII		| \
+	MVGBE_DTE_ADV_0				| \
+	MVGBE_MIIPHY_MAC_MODE			| \
+	MVGBE_AUTO_NEG_NO_CHANGE		| \
+	MVGBE_MAX_RX_PACKET_1552BYTE		| \
+	MVGBE_CLR_EXT_LOOPBACK			| \
+	MVGBE_SET_FULL_DUPLEX_MODE		| \
+	MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX)
 
 /* Tx WRR confoguration macros */
 #define PORT_MAX_TRAN_UNIT	0x24	/* MTU register (default) 9KByte */
@@ -112,187 +112,189 @@
 #define ACCEPT_MAC_ADDR		0
 #define REJECT_MAC_ADDR		1
 /* Size of a Tx/Rx descriptor used in chain list data structure */
-#define KW_RXQ_DESC_ALIGNED_SIZE	\
-	(((sizeof(struct kwgbe_rxdesc) / PKTALIGN) + 1) * PKTALIGN)
+#define MV_RXQ_DESC_ALIGNED_SIZE	\
+	(((sizeof(struct mvgbe_rxdesc) / PKTALIGN) + 1) * PKTALIGN)
 /* Buffer offset from buffer pointer */
 #define RX_BUF_OFFSET		0x2
 
 /* Port serial status reg (PSR) */
-#define KWGBE_INTERFACE_GMII_MII	0
-#define KWGBE_INTERFACE_PCM		1
-#define KWGBE_LINK_IS_DOWN		0
-#define KWGBE_LINK_IS_UP		(1 << 1)
-#define KWGBE_PORT_AT_HALF_DUPLEX	0
-#define KWGBE_PORT_AT_FULL_DUPLEX	(1 << 2)
-#define KWGBE_RX_FLOW_CTRL_DISD		0
-#define KWGBE_RX_FLOW_CTRL_ENBALED	(1 << 3)
-#define KWGBE_GMII_SPEED_100_10		0
-#define KWGBE_GMII_SPEED_1000		(1 << 4)
-#define KWGBE_MII_SPEED_10		0
-#define KWGBE_MII_SPEED_100		(1 << 5)
-#define KWGBE_NO_TX			0
-#define KWGBE_TX_IN_PROGRESS		(1 << 7)
-#define KWGBE_BYPASS_NO_ACTIVE		0
-#define KWGBE_BYPASS_ACTIVE		(1 << 8)
-#define KWGBE_PORT_NOT_AT_PARTN_STT	0
-#define KWGBE_PORT_AT_PARTN_STT		(1 << 9)
-#define KWGBE_PORT_TX_FIFO_NOT_EMPTY	0
-#define KWGBE_PORT_TX_FIFO_EMPTY	(1 << 10)
+#define MVGBE_INTERFACE_GMII_MII	0
+#define MVGBE_INTERFACE_PCM		1
+#define MVGBE_LINK_IS_DOWN		0
+#define MVGBE_LINK_IS_UP		(1 << 1)
+#define MVGBE_PORT_AT_HALF_DUPLEX	0
+#define MVGBE_PORT_AT_FULL_DUPLEX	(1 << 2)
+#define MVGBE_RX_FLOW_CTRL_DISD		0
+#define MVGBE_RX_FLOW_CTRL_ENBALED	(1 << 3)
+#define MVGBE_GMII_SPEED_100_10		0
+#define MVGBE_GMII_SPEED_1000		(1 << 4)
+#define MVGBE_MII_SPEED_10		0
+#define MVGBE_MII_SPEED_100		(1 << 5)
+#define MVGBE_NO_TX			0
+#define MVGBE_TX_IN_PROGRESS		(1 << 7)
+#define MVGBE_BYPASS_NO_ACTIVE		0
+#define MVGBE_BYPASS_ACTIVE		(1 << 8)
+#define MVGBE_PORT_NOT_AT_PARTN_STT	0
+#define MVGBE_PORT_AT_PARTN_STT		(1 << 9)
+#define MVGBE_PORT_TX_FIFO_NOT_EMPTY	0
+#define MVGBE_PORT_TX_FIFO_EMPTY	(1 << 10)
 
 /* These macros describes the Port configuration reg (Px_cR) bits */
-#define KWGBE_UCAST_MOD_NRML		0
-#define KWGBE_UNICAST_PROMISCUOUS_MODE	1
-#define KWGBE_DFLT_RXQ(_x)		(_x << 1)
-#define KWGBE_DFLT_RX_ARPQ(_x)		(_x << 4)
-#define KWGBE_RX_BC_IF_NOT_IP_OR_ARP	0
-#define KWGBE_REJECT_BC_IF_NOT_IP_OR_ARP (1 << 7)
-#define KWGBE_RX_BC_IF_IP		0
-#define KWGBE_REJECT_BC_IF_IP		(1 << 8)
-#define KWGBE_RX_BC_IF_ARP		0
-#define KWGBE_REJECT_BC_IF_ARP		(1 << 9)
-#define KWGBE_TX_AM_NO_UPDATE_ERR_SMRY	(1 << 12)
-#define KWGBE_CPTR_TCP_FRMS_DIS		0
-#define KWGBE_CPTR_TCP_FRMS_EN		(1 << 14)
-#define KWGBE_CPTR_UDP_FRMS_DIS		0
-#define KWGBE_CPTR_UDP_FRMS_EN		(1 << 15)
-#define KWGBE_DFLT_RX_TCPQ(_x)		(_x << 16)
-#define KWGBE_DFLT_RX_UDPQ(_x)		(_x << 19)
-#define KWGBE_DFLT_RX_BPDUQ(_x)		(_x << 22)
-#define KWGBE_DFLT_RX_TCP_CHKSUM_MODE	(1 << 25)
+#define MVGBE_UCAST_MOD_NRML		0
+#define MVGBE_UNICAST_PROMISCUOUS_MODE	1
+#define MVGBE_DFLT_RXQ(_x)		(_x << 1)
+#define MVGBE_DFLT_RX_ARPQ(_x)		(_x << 4)
+#define MVGBE_RX_BC_IF_NOT_IP_OR_ARP	0
+#define MVGBE_REJECT_BC_IF_NOT_IP_OR_ARP (1 << 7)
+#define MVGBE_RX_BC_IF_IP		0
+#define MVGBE_REJECT_BC_IF_IP		(1 << 8)
+#define MVGBE_RX_BC_IF_ARP		0
+#define MVGBE_REJECT_BC_IF_ARP		(1 << 9)
+#define MVGBE_TX_AM_NO_UPDATE_ERR_SMRY	(1 << 12)
+#define MVGBE_CPTR_TCP_FRMS_DIS		0
+#define MVGBE_CPTR_TCP_FRMS_EN		(1 << 14)
+#define MVGBE_CPTR_UDP_FRMS_DIS		0
+#define MVGBE_CPTR_UDP_FRMS_EN		(1 << 15)
+#define MVGBE_DFLT_RX_TCPQ(_x)		(_x << 16)
+#define MVGBE_DFLT_RX_UDPQ(_x)		(_x << 19)
+#define MVGBE_DFLT_RX_BPDUQ(_x)		(_x << 22)
+#define MVGBE_DFLT_RX_TCP_CHKSUM_MODE	(1 << 25)
 
 /* These macros describes the Port configuration extend reg (Px_cXR) bits*/
-#define KWGBE_CLASSIFY_EN			1
-#define KWGBE_SPAN_BPDU_PACKETS_AS_NORMAL	0
-#define KWGBE_SPAN_BPDU_PACKETS_TO_RX_Q7	(1 << 1)
-#define KWGBE_PARTITION_DIS			0
-#define KWGBE_PARTITION_EN			(1 << 2)
-#define KWGBE_TX_CRC_GENERATION_EN		0
-#define KWGBE_TX_CRC_GENERATION_DIS		(1 << 3)
+#define MVGBE_CLASSIFY_EN			1
+#define MVGBE_SPAN_BPDU_PACKETS_AS_NORMAL	0
+#define MVGBE_SPAN_BPDU_PACKETS_TO_RX_Q7	(1 << 1)
+#define MVGBE_PARTITION_DIS			0
+#define MVGBE_PARTITION_EN			(1 << 2)
+#define MVGBE_TX_CRC_GENERATION_EN		0
+#define MVGBE_TX_CRC_GENERATION_DIS		(1 << 3)
 
 /* These macros describes the Port Sdma configuration reg (SDCR) bits */
-#define KWGBE_RIFB				1
-#define KWGBE_RX_BURST_SIZE_1_64BIT		0
-#define KWGBE_RX_BURST_SIZE_2_64BIT		(1 << 1)
-#define KWGBE_RX_BURST_SIZE_4_64BIT		(1 << 2)
-#define KWGBE_RX_BURST_SIZE_8_64BIT		((1 << 2) | (1 << 1))
-#define KWGBE_RX_BURST_SIZE_16_64BIT		(1 << 3)
-#define KWGBE_BLM_RX_NO_SWAP			(1 << 4)
-#define KWGBE_BLM_RX_BYTE_SWAP			0
-#define KWGBE_BLM_TX_NO_SWAP			(1 << 5)
-#define KWGBE_BLM_TX_BYTE_SWAP			0
-#define KWGBE_DESCRIPTORS_BYTE_SWAP		(1 << 6)
-#define KWGBE_DESCRIPTORS_NO_SWAP		0
-#define KWGBE_TX_BURST_SIZE_1_64BIT		0
-#define KWGBE_TX_BURST_SIZE_2_64BIT		(1 << 22)
-#define KWGBE_TX_BURST_SIZE_4_64BIT		(1 << 23)
-#define KWGBE_TX_BURST_SIZE_8_64BIT		((1 << 23) | (1 << 22))
-#define KWGBE_TX_BURST_SIZE_16_64BIT		(1 << 24)
+#define MVGBE_RIFB				1
+#define MVGBE_RX_BURST_SIZE_1_64BIT		0
+#define MVGBE_RX_BURST_SIZE_2_64BIT		(1 << 1)
+#define MVGBE_RX_BURST_SIZE_4_64BIT		(1 << 2)
+#define MVGBE_RX_BURST_SIZE_8_64BIT		((1 << 2) | (1 << 1))
+#define MVGBE_RX_BURST_SIZE_16_64BIT		(1 << 3)
+#define MVGBE_BLM_RX_NO_SWAP			(1 << 4)
+#define MVGBE_BLM_RX_BYTE_SWAP			0
+#define MVGBE_BLM_TX_NO_SWAP			(1 << 5)
+#define MVGBE_BLM_TX_BYTE_SWAP			0
+#define MVGBE_DESCRIPTORS_BYTE_SWAP		(1 << 6)
+#define MVGBE_DESCRIPTORS_NO_SWAP		0
+#define MVGBE_TX_BURST_SIZE_1_64BIT		0
+#define MVGBE_TX_BURST_SIZE_2_64BIT		(1 << 22)
+#define MVGBE_TX_BURST_SIZE_4_64BIT		(1 << 23)
+#define MVGBE_TX_BURST_SIZE_8_64BIT		((1 << 23) | (1 << 22))
+#define MVGBE_TX_BURST_SIZE_16_64BIT		(1 << 24)
 
 /* These macros describes the Port serial control reg (PSCR) bits */
-#define KWGBE_SERIAL_PORT_DIS			0
-#define KWGBE_SERIAL_PORT_EN			1
-#define KWGBE_FORCE_LINK_PASS			(1 << 1)
-#define KWGBE_DO_NOT_FORCE_LINK_PASS		0
-#define KWGBE_EN_AUTO_NEG_FOR_DUPLX		0
-#define KWGBE_DIS_AUTO_NEG_FOR_DUPLX		(1 << 2)
-#define KWGBE_EN_AUTO_NEG_FOR_FLOW_CTRL		0
-#define KWGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL	(1 << 3)
-#define KWGBE_ADV_NO_FLOW_CTRL			0
-#define KWGBE_ADV_SYMMETRIC_FLOW_CTRL		(1 << 4)
-#define KWGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX	0
-#define KWGBE_FORCE_FC_MODE_TX_PAUSE_DIS	(1 << 5)
-#define KWGBE_FORCE_BP_MODE_NO_JAM		0
-#define KWGBE_FORCE_BP_MODE_JAM_TX		(1 << 7)
-#define KWGBE_FORCE_BP_MODE_JAM_TX_ON_RX_ERR	(1 << 8)
-#define KWGBE_FORCE_LINK_FAIL			0
-#define KWGBE_DO_NOT_FORCE_LINK_FAIL		(1 << 10)
-#define KWGBE_DIS_AUTO_NEG_SPEED_GMII		(1 << 13)
-#define KWGBE_EN_AUTO_NEG_SPEED_GMII		0
-#define KWGBE_DTE_ADV_0				0
-#define KWGBE_DTE_ADV_1				(1 << 14)
-#define KWGBE_MIIPHY_MAC_MODE			0
-#define KWGBE_MIIPHY_PHY_MODE			(1 << 15)
-#define KWGBE_AUTO_NEG_NO_CHANGE		0
-#define KWGBE_RESTART_AUTO_NEG			(1 << 16)
-#define KWGBE_MAX_RX_PACKET_1518BYTE		0
-#define KWGBE_MAX_RX_PACKET_1522BYTE		(1 << 17)
-#define KWGBE_MAX_RX_PACKET_1552BYTE		(1 << 18)
-#define KWGBE_MAX_RX_PACKET_9022BYTE		((1 << 18) | (1 << 17))
-#define KWGBE_MAX_RX_PACKET_9192BYTE		(1 << 19)
-#define KWGBE_MAX_RX_PACKET_9700BYTE		((1 << 19) | (1 << 17))
-#define KWGBE_SET_EXT_LOOPBACK			(1 << 20)
-#define KWGBE_CLR_EXT_LOOPBACK			0
-#define KWGBE_SET_FULL_DUPLEX_MODE		(1 << 21)
-#define KWGBE_SET_HALF_DUPLEX_MODE		0
-#define KWGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	(1 << 22)
-#define KWGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0
-#define KWGBE_SET_GMII_SPEED_TO_10_100		0
-#define KWGBE_SET_GMII_SPEED_TO_1000		(1 << 23)
-#define KWGBE_SET_MII_SPEED_TO_10		0
-#define KWGBE_SET_MII_SPEED_TO_100		(1 << 24)
+#define MVGBE_SERIAL_PORT_DIS			0
+#define MVGBE_SERIAL_PORT_EN			1
+#define MVGBE_FORCE_LINK_PASS			(1 << 1)
+#define MVGBE_DO_NOT_FORCE_LINK_PASS		0
+#define MVGBE_EN_AUTO_NEG_FOR_DUPLX		0
+#define MVGBE_DIS_AUTO_NEG_FOR_DUPLX		(1 << 2)
+#define MVGBE_EN_AUTO_NEG_FOR_FLOW_CTRL		0
+#define MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL	(1 << 3)
+#define MVGBE_ADV_NO_FLOW_CTRL			0
+#define MVGBE_ADV_SYMMETRIC_FLOW_CTRL		(1 << 4)
+#define MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX	0
+#define MVGBE_FORCE_FC_MODE_TX_PAUSE_DIS	(1 << 5)
+#define MVGBE_FORCE_BP_MODE_NO_JAM		0
+#define MVGBE_FORCE_BP_MODE_JAM_TX		(1 << 7)
+#define MVGBE_FORCE_BP_MODE_JAM_TX_ON_RX_ERR	(1 << 8)
+#define MVGBE_FORCE_LINK_FAIL			0
+#define MVGBE_DO_NOT_FORCE_LINK_FAIL		(1 << 10)
+#define MVGBE_DIS_AUTO_NEG_SPEED_GMII		(1 << 13)
+#define MVGBE_EN_AUTO_NEG_SPEED_GMII		0
+#define MVGBE_DTE_ADV_0				0
+#define MVGBE_DTE_ADV_1				(1 << 14)
+#define MVGBE_MIIPHY_MAC_MODE			0
+#define MVGBE_MIIPHY_PHY_MODE			(1 << 15)
+#define MVGBE_AUTO_NEG_NO_CHANGE		0
+#define MVGBE_RESTART_AUTO_NEG			(1 << 16)
+#define MVGBE_MAX_RX_PACKET_1518BYTE		0
+#define MVGBE_MAX_RX_PACKET_1522BYTE		(1 << 17)
+#define MVGBE_MAX_RX_PACKET_1552BYTE		(1 << 18)
+#define MVGBE_MAX_RX_PACKET_9022BYTE		((1 << 18) | (1 << 17))
+#define MVGBE_MAX_RX_PACKET_9192BYTE		(1 << 19)
+#define MVGBE_MAX_RX_PACKET_9700BYTE		((1 << 19) | (1 << 17))
+#define MVGBE_SET_EXT_LOOPBACK			(1 << 20)
+#define MVGBE_CLR_EXT_LOOPBACK			0
+#define MVGBE_SET_FULL_DUPLEX_MODE		(1 << 21)
+#define MVGBE_SET_HALF_DUPLEX_MODE		0
+#define MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX	(1 << 22)
+#define MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX 0
+#define MVGBE_SET_GMII_SPEED_TO_10_100		0
+#define MVGBE_SET_GMII_SPEED_TO_1000		(1 << 23)
+#define MVGBE_SET_MII_SPEED_TO_10		0
+#define MVGBE_SET_MII_SPEED_TO_100		(1 << 24)
 
 /* SMI register fields */
-#define KWGBE_PHY_SMI_TIMEOUT		10000
-#define KWGBE_PHY_SMI_DATA_OFFS		0	/* Data */
-#define KWGBE_PHY_SMI_DATA_MASK		(0xffff << KWGBE_PHY_SMI_DATA_OFFS)
-#define KWGBE_PHY_SMI_DEV_ADDR_OFFS	16	/* PHY device address */
-#define KWGBE_PHY_SMI_DEV_ADDR_MASK	(PHYADR_MASK << KWGBE_PHY_SMI_DEV_ADDR_OFFS)
-#define KWGBE_SMI_REG_ADDR_OFFS		21	/* PHY device reg addr */
-#define KWGBE_SMI_REG_ADDR_MASK		(PHYADR_MASK << KWGBE_SMI_REG_ADDR_OFFS)
-#define KWGBE_PHY_SMI_OPCODE_OFFS	26	/* Write/Read opcode */
-#define KWGBE_PHY_SMI_OPCODE_MASK	(3 << KWGBE_PHY_SMI_OPCODE_OFFS)
-#define KWGBE_PHY_SMI_OPCODE_WRITE	(0 << KWGBE_PHY_SMI_OPCODE_OFFS)
-#define KWGBE_PHY_SMI_OPCODE_READ	(1 << KWGBE_PHY_SMI_OPCODE_OFFS)
-#define KWGBE_PHY_SMI_READ_VALID_MASK	(1 << 27)	/* Read Valid */
-#define KWGBE_PHY_SMI_BUSY_MASK		(1 << 28)	/* Busy */
+#define MVGBE_PHY_SMI_TIMEOUT		10000
+#define MVGBE_PHY_SMI_DATA_OFFS		0	/* Data */
+#define MVGBE_PHY_SMI_DATA_MASK		(0xffff << MVGBE_PHY_SMI_DATA_OFFS)
+#define MVGBE_PHY_SMI_DEV_ADDR_OFFS	16	/* PHY device address */
+#define MVGBE_PHY_SMI_DEV_ADDR_MASK \
+	(PHYADR_MASK << MVGBE_PHY_SMI_DEV_ADDR_OFFS)
+#define MVGBE_SMI_REG_ADDR_OFFS		21	/* PHY device reg addr */
+#define MVGBE_SMI_REG_ADDR_MASK \
+	(PHYADR_MASK << MVGBE_SMI_REG_ADDR_OFFS)
+#define MVGBE_PHY_SMI_OPCODE_OFFS	26	/* Write/Read opcode */
+#define MVGBE_PHY_SMI_OPCODE_MASK	(3 << MVGBE_PHY_SMI_OPCODE_OFFS)
+#define MVGBE_PHY_SMI_OPCODE_WRITE	(0 << MVGBE_PHY_SMI_OPCODE_OFFS)
+#define MVGBE_PHY_SMI_OPCODE_READ	(1 << MVGBE_PHY_SMI_OPCODE_OFFS)
+#define MVGBE_PHY_SMI_READ_VALID_MASK	(1 << 27)	/* Read Valid */
+#define MVGBE_PHY_SMI_BUSY_MASK		(1 << 28)	/* Busy */
 
 /* SDMA command status fields macros */
 /* Tx & Rx descriptors status */
-#define KWGBE_ERROR_SUMMARY		1
+#define MVGBE_ERROR_SUMMARY		1
 /* Tx & Rx descriptors command */
-#define KWGBE_BUFFER_OWNED_BY_DMA	(1 << 31)
+#define MVGBE_BUFFER_OWNED_BY_DMA	(1 << 31)
 /* Tx descriptors status */
-#define KWGBE_LC_ERROR			0
-#define KWGBE_UR_ERROR			(1 << 1)
-#define KWGBE_RL_ERROR			(1 << 2)
-#define KWGBE_LLC_SNAP_FORMAT		(1 << 9)
-#define KWGBE_TX_LAST_FRAME		(1 << 20)
+#define MVGBE_LC_ERROR			0
+#define MVGBE_UR_ERROR			(1 << 1)
+#define MVGBE_RL_ERROR			(1 << 2)
+#define MVGBE_LLC_SNAP_FORMAT		(1 << 9)
+#define MVGBE_TX_LAST_FRAME		(1 << 20)
 
 /* Rx descriptors status */
-#define KWGBE_CRC_ERROR			0
-#define KWGBE_OVERRUN_ERROR		(1 << 1)
-#define KWGBE_MAX_FRAME_LENGTH_ERROR	(1 << 2)
-#define KWGBE_RESOURCE_ERROR		((1 << 2) | (1 << 1))
-#define KWGBE_VLAN_TAGGED		(1 << 19)
-#define KWGBE_BPDU_FRAME		(1 << 20)
-#define KWGBE_TCP_FRAME_OVER_IP_V_4	0
-#define KWGBE_UDP_FRAME_OVER_IP_V_4	(1 << 21)
-#define KWGBE_OTHER_FRAME_TYPE		(1 << 22)
-#define KWGBE_LAYER_2_IS_KWGBE_V_2	(1 << 23)
-#define KWGBE_FRAME_TYPE_IP_V_4		(1 << 24)
-#define KWGBE_FRAME_HEADER_OK		(1 << 25)
-#define KWGBE_RX_LAST_DESC		(1 << 26)
-#define KWGBE_RX_FIRST_DESC		(1 << 27)
-#define KWGBE_UNKNOWN_DESTINATION_ADDR	(1 << 28)
-#define KWGBE_RX_EN_INTERRUPT		(1 << 29)
-#define KWGBE_LAYER_4_CHECKSUM_OK	(1 << 30)
+#define MVGBE_CRC_ERROR			0
+#define MVGBE_OVERRUN_ERROR		(1 << 1)
+#define MVGBE_MAX_FRAME_LENGTH_ERROR	(1 << 2)
+#define MVGBE_RESOURCE_ERROR		((1 << 2) | (1 << 1))
+#define MVGBE_VLAN_TAGGED		(1 << 19)
+#define MVGBE_BPDU_FRAME		(1 << 20)
+#define MVGBE_TCP_FRAME_OVER_IP_V_4	0
+#define MVGBE_UDP_FRAME_OVER_IP_V_4	(1 << 21)
+#define MVGBE_OTHER_FRAME_TYPE		(1 << 22)
+#define MVGBE_LAYER_2_IS_MVGBE_V_2	(1 << 23)
+#define MVGBE_FRAME_TYPE_IP_V_4		(1 << 24)
+#define MVGBE_FRAME_HEADER_OK		(1 << 25)
+#define MVGBE_RX_LAST_DESC		(1 << 26)
+#define MVGBE_RX_FIRST_DESC		(1 << 27)
+#define MVGBE_UNKNOWN_DESTINATION_ADDR	(1 << 28)
+#define MVGBE_RX_EN_INTERRUPT		(1 << 29)
+#define MVGBE_LAYER_4_CHECKSUM_OK	(1 << 30)
 
 /* Rx descriptors byte count */
-#define KWGBE_FRAME_FRAGMENTED		(1 << 2)
+#define MVGBE_FRAME_FRAGMENTED		(1 << 2)
 
 /* Tx descriptors command */
-#define KWGBE_LAYER_4_CHECKSUM_FIRST_DESC	(1 << 10)
-#define KWGBE_FRAME_SET_TO_VLAN			(1 << 15)
-#define KWGBE_TCP_FRAME				0
-#define KWGBE_UDP_FRAME				(1 << 16)
-#define KWGBE_GEN_TCP_UDP_CHECKSUM		(1 << 17)
-#define KWGBE_GEN_IP_V_4_CHECKSUM		(1 << 18)
-#define KWGBE_ZERO_PADDING			(1 << 19)
-#define KWGBE_TX_LAST_DESC			(1 << 20)
-#define KWGBE_TX_FIRST_DESC			(1 << 21)
-#define KWGBE_GEN_CRC				(1 << 22)
-#define KWGBE_TX_EN_INTERRUPT			(1 << 23)
-#define KWGBE_AUTO_MODE				(1 << 30)
+#define MVGBE_LAYER_4_CHECKSUM_FIRST_DESC	(1 << 10)
+#define MVGBE_FRAME_SET_TO_VLAN			(1 << 15)
+#define MVGBE_TCP_FRAME				0
+#define MVGBE_UDP_FRAME				(1 << 16)
+#define MVGBE_GEN_TCP_UDP_CHECKSUM		(1 << 17)
+#define MVGBE_GEN_IP_V_4_CHECKSUM		(1 << 18)
+#define MVGBE_ZERO_PADDING			(1 << 19)
+#define MVGBE_TX_LAST_DESC			(1 << 20)
+#define MVGBE_TX_FIRST_DESC			(1 << 21)
+#define MVGBE_GEN_CRC				(1 << 22)
+#define MVGBE_TX_EN_INTERRUPT			(1 << 23)
+#define MVGBE_AUTO_MODE				(1 << 30)
 
 /* Address decode parameters */
 /* Ethernet Base Address Register bits */
@@ -341,24 +343,24 @@
 #define EWIN_ACCESS_FULL	((1 << 1) | 1)
 
 /* structures represents Controller registers */
-struct kwgbe_barsz {
+struct mvgbe_barsz {
 	u32 bar;
 	u32 size;
 };
 
-struct kwgbe_rxcdp {
-	struct kwgbe_rxdesc *rxcdp;
+struct mvgbe_rxcdp {
+	struct mvgbe_rxdesc *rxcdp;
 	u32 rxcdp_pad[3];
 };
 
-struct kwgbe_tqx {
+struct mvgbe_tqx {
 	u32 qxttbc;
 	u32 tqxtbc;
 	u32 tqxac;
 	u32 tqxpad;
 };
 
-struct kwgbe_registers {
+struct mvgbe_registers {
 	u32 phyadr;
 	u32 smi;
 	u32 euda;
@@ -372,7 +374,7 @@
 	u8 pad3[0x0b0 - 0x098 - 4];
 	u32 euc;
 	u8 pad3a[0x200 - 0x0b0 - 4];
-	struct kwgbe_barsz barsz[6];
+	struct mvgbe_barsz barsz[6];
 	u8 pad4[0x280 - 0x22c - 4];
 	u32 ha_remap[4];
 	u32 bare;
@@ -417,14 +419,14 @@
 	u32 pmtu;
 	u32 pmtbs;
 	u8 pad14[0x60c - 0x4ec - 4];
-	struct kwgbe_rxcdp rxcdp[7];
-	struct kwgbe_rxdesc *rxcdp7;
+	struct mvgbe_rxcdp rxcdp[7];
+	struct mvgbe_rxdesc *rxcdp7;
 	u32 rqc;
-	struct kwgbe_txdesc *tcsdp;
+	struct mvgbe_txdesc *tcsdp;
 	u8 pad15[0x6c0 - 0x684 - 4];
-	struct kwgbe_txdesc *tcqdp[8];
+	struct mvgbe_txdesc *tcqdp[8];
 	u8 pad16[0x700 - 0x6dc - 4];
-	struct kwgbe_tqx tqx[8];
+	struct mvgbe_tqx tqx[8];
 	u32 pttbc;
 	u8 pad17[0x7a8 - 0x780 - 4];
 	u32 tqxipg0;
@@ -447,26 +449,26 @@
 };
 
 /* structures/enums needed by driver */
-enum kwgbe_adrwin {
-	KWGBE_WIN0,
-	KWGBE_WIN1,
-	KWGBE_WIN2,
-	KWGBE_WIN3,
-	KWGBE_WIN4,
-	KWGBE_WIN5
+enum mvgbe_adrwin {
+	MVGBE_WIN0,
+	MVGBE_WIN1,
+	MVGBE_WIN2,
+	MVGBE_WIN3,
+	MVGBE_WIN4,
+	MVGBE_WIN5
 };
 
-enum kwgbe_target {
-	KWGBE_TARGET_DRAM,
-	KWGBE_TARGET_DEV,
-	KWGBE_TARGET_CBS,
-	KWGBE_TARGET_PCI0,
-	KWGBE_TARGET_PCI1
+enum mvgbe_target {
+	MVGBE_TARGET_DRAM,
+	MVGBE_TARGET_DEV,
+	MVGBE_TARGET_CBS,
+	MVGBE_TARGET_PCI0,
+	MVGBE_TARGET_PCI1
 };
 
-struct kwgbe_winparam {
-	enum kwgbe_adrwin win;	/* Window number */
-	enum kwgbe_target target;	/* System targets */
+struct mvgbe_winparam {
+	enum mvgbe_adrwin win;	/* Window number */
+	enum mvgbe_target target;	/* System targets */
 	u16 attrib;		/* BAR attrib. See above macros */
 	u32 base_addr;		/* Window base address in u32 form */
 	u32 high_addr;		/* Window high address in u32 form */
@@ -475,31 +477,31 @@
 	u16 access_ctrl;	/*Access ctrl register. see above macros */
 };
 
-struct kwgbe_rxdesc {
+struct mvgbe_rxdesc {
 	u32 cmd_sts;		/* Descriptor command status */
 	u16 buf_size;		/* Buffer size */
 	u16 byte_cnt;		/* Descriptor buffer byte count */
 	u8 *buf_ptr;		/* Descriptor buffer pointer */
-	struct kwgbe_rxdesc *nxtdesc_p;	/* Next descriptor pointer */
+	struct mvgbe_rxdesc *nxtdesc_p;	/* Next descriptor pointer */
 };
 
-struct kwgbe_txdesc {
+struct mvgbe_txdesc {
 	u32 cmd_sts;		/* Descriptor command status */
 	u16 l4i_chk;		/* CPU provided TCP Checksum */
 	u16 byte_cnt;		/* Descriptor buffer byte count */
 	u8 *buf_ptr;		/* Descriptor buffer ptr */
-	struct kwgbe_txdesc *nxtdesc_p;	/* Next descriptor ptr */
+	struct mvgbe_txdesc *nxtdesc_p;	/* Next descriptor ptr */
 };
 
 /* port device data struct */
-struct kwgbe_device {
+struct mvgbe_device {
 	struct eth_device dev;
-	struct kwgbe_registers *regs;
-	struct kwgbe_txdesc *p_txdesc;
-	struct kwgbe_rxdesc *p_rxdesc;
-	struct kwgbe_rxdesc *p_rxdesc_curr;
+	struct mvgbe_registers *regs;
+	struct mvgbe_txdesc *p_txdesc;
+	struct mvgbe_rxdesc *p_rxdesc;
+	struct mvgbe_rxdesc *p_rxdesc_curr;
 	u8 *p_rxbuf;
 	u8 *p_aligned_txbuf;
 };
 
-#endif /* __EGIGA_H__ */
+#endif /* __MVGBE_H__ */
diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
index 2fbc6ad..eb3fa57 100644
--- a/include/configs/guruplug.h
+++ b/include/configs/guruplug.h
@@ -172,9 +172,9 @@
 #define CONFIG_NET_MULTI	/* specify more that one ports available */
 #define CONFIG_MII		/* expose smi ove miiphy interface */
 #define CONFIG_CMD_MII
-#define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,1}	/* enable both ports */
+#define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
 #define CONFIG_PHY_BASE_ADR	0
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv88e1121 PHY */
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
index a928c2c..6519c90 100644
--- a/include/configs/km_arm.h
+++ b/include/configs/km_arm.h
@@ -127,9 +127,9 @@
 #define CONFIG_NETCONSOLE	/* include NetConsole support   */
 #define CONFIG_NET_MULTI	/* specify more that one ports available */
 #define CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,0}	/* enable port 0 only */
+#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init 88E1118 PHY */
diff --git a/include/configs/mv88f6281gtw_ge.h b/include/configs/mv88f6281gtw_ge.h
index 96b4d1c..9ef03a6 100644
--- a/include/configs/mv88f6281gtw_ge.h
+++ b/include/configs/mv88f6281gtw_ge.h
@@ -172,9 +172,9 @@
 #define CONFIG_NETCONSOLE	/* include NetConsole support   */
 #define CONFIG_NET_MULTI	/* specify more that one ports available */
 #define	CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,0}	/* enable port 0 only */
+#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #endif /* CONFIG_CMD_NET */
 
diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h
index d2f4502..52fa73d 100644
--- a/include/configs/openrd_base.h
+++ b/include/configs/openrd_base.h
@@ -183,9 +183,9 @@
 #define CONFIG_NETCONSOLE	/* include NetConsole support   */
 #define CONFIG_NET_MULTI	/* specify more that one ports available */
 #define	CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,0}	/* enable port 0 only */
+#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0x8
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h
index 3d8e25c..5857301 100644
--- a/include/configs/rd6281a.h
+++ b/include/configs/rd6281a.h
@@ -171,8 +171,8 @@
 #define CONFIG_NETCONSOLE	/* include NetConsole support */
 #define CONFIG_NET_MULTI	/* specify more that one ports available */
 #define CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,1}	/* enable both ports */
+#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
+#define CONFIG_MVGBE_PORTS	{1, 1}	/* enable both ports */
 #define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
 #define CONFIG_DIS_AUTO_NEG_SPEED_GMII /*Disable Auto speed negociation */
 #define CONFIG_PHY_SPEED	_1000BASET	/*Force PHYspeed to 1GBPs */
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index e9edc44..c5de86e 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -174,9 +174,9 @@
 #define CONFIG_NETCONSOLE	/* include NetConsole support   */
 #define CONFIG_NET_MULTI	/* specify more that one ports available */
 #define	CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_KIRKWOOD_EGIGA	/* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
-#define CONFIG_KIRKWOOD_EGIGA_PORTS	{1,0}	/* enable port 0 only */
+#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
diff --git a/include/netdev.h b/include/netdev.h
index eb04b63..94eedfe 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -63,7 +63,6 @@
 int greth_initialize(bd_t *bis);
 void gt6426x_eth_initialize(bd_t *bis);
 int inca_switch_initialize(bd_t *bis);
-int kirkwood_egiga_initialize(bd_t *bis);
 int lan91c96_initialize(u8 dev_num, int base_addr);
 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
 int mcdmafec_initialize(bd_t *bis);
@@ -72,6 +71,7 @@
 int mpc5xxx_fec_initialize(bd_t *bis);
 int mpc8220_fec_initialize(bd_t *bis);
 int mpc82xx_scc_enet_initialize(bd_t *bis);
+int mvgbe_initialize(bd_t *bis);
 int natsemi_initialize(bd_t *bis);
 int npe_initialize(bd_t *bis);
 int ns8382x_initialize(bd_t *bis);